Features:
¡ꡧ1¡ê?Quick, accurate, easy to use with a button displays your oxygen saturation, pulse rate, pulse strength.
¡ꡧ2¡ê?AAA battery (not included) power supply, more than 30 hours of battery life and having low power indicator. Automatic shut down after 8 seconds when remove your finger, energy saving.
¡ꡧ3¡ê?Display parameters: blood oxygen SPO2, pulse PR, histogram, PI perfusion index.
¡ꡧ4¡ê?Simple to use, low power consumption, small size, light weight, easy to carry.Blood oxygen probe and processing display module are integrated.
¡ꡧ5¡ê?Monitoring parameter SPO2: suitable for all people above 4 years, measuring range of 70-99%.
¡ꡧ6¡ê?Oximeter saturation: an important indicator of oxygen status in the body. It is generally believed that the normal blood oxygen saturation value should not be lower than 94%, and below 94% is considered as insufficient oxygen supply.
¡ꡧ7¡ê?Heart Rate: refers to the number of beats per minute of the Heart.The same person’s heart rate slows during quiet or sleep, and increases during exercise or emotional arousal.
¡ꡧ8¡ê?Perfusion Index, Pl value reflects the pulsating blood flow, so it reflects the Perfusion ability.The greater the pulsating blood flow, the more pulsating components, and the greater the PI value.Therefore, PI values are influenced by the measured site (skin, nails, bone, etc.) and the patient’s own perfusion status (arterial blood flow).Since the sympathetic nerve affects heart rate and arterial blood pressure (which affects pulse and arterial blood flow), the body’s neuroregulatory system or mental state also indirectly affects the P value.Therefore, the PI value will be different under different anesthesia.

Specification:
Condition: 100% Brand New
Blood Oxygen Saturation Range: 70% ~ 99%
Pulse Rate Measurement Range: 30BPM~240BPM
Accuracy of Blood Oxygen Saturation Measurement: ?¨¤2% within the range of 70% ~ 99%, ?¨¹70% not defined
Pulse Rate Measurement Accuracy: ?¨¤1BPM or ?¨¤1% of the measured value (larger value)
Blood Oxygen Saturation Resolution: ?¨¤1%
Power Consumption: less than 30mA
Auto Shutdown: auto shutdown in 8 seconds without finger insertion
Service Temperature: 5C~40??
Storage Humidity: 15%~80% when working, 10%~80% storage
Atmospheric Pressure: 70Kpa ~ 106Kpa
Battery: 2 x 1.5v AAA (Not included)
Material: ABS + PC
Size¡êo57*31*31mm
Suitable: for all people above 4 years
Measuring Range: 70-99%
Analytic: 1%
Accuracy: 70%–99%?¨¤2%
(PR)BPM:
Measurement Range: 30bpm -250bpm
Accuracy: 1% or 1bpm
Blood Perfusion Indicates Pl:
Measurement Range: 0.2%-30%PI
Analysis: 1%
Usage:
Load two AAA batteries(Not included) according to the positive and negative marks in the battery compartment and cover the battery cover.
Pinch the finger pulse oximeter clip.
Insert your finger into the rubber orifice (insert your finger fully) and release the clamp.
Click the switch button on the front panel.
Do not shake your fingers or move your body during use.
Read relevant data directly from the display screen, which can display blood oxygen saturation, pulse rate, pulse amplitude and PI perfusion index.

Note:

* Do not operate the unit if it is damp or wet because of condensation or spill. Avoid using the equipment immediately after moving it from a cold environment to a warm, humid location.

* Fingernail polish or fake fingernails may cause inaccurate SpO2 readings.

* SpO2 measurements may be adversely affected in the presence of high ambient light. Cover the sensor area from direct sunlight (with a surgical towel,for example) if necessary.

* There could be some deviations due to manual measurement or slight color difference owing to photographing condition. Thank you for your understanding.

Package List:
1 x Manual
1 x Oximeter (Not included batteries)